How to replace RO Membrane?
I hope every industry has a RO plant in their firm from where the associates or workers can consume water. And you all are aware that it is a machinery object, so, every machinery object requires to be maintained properly to run smoothly.
Every reverse osmosis
system has an RO membrane in it which helps in the process of filtration. As it is a
continuous process thus all the dust and dirt which are separated from the
water by the membrane gets stuck on it while processing for a long time. So it
needs to be changed on every 1 year of interval.
There are certain
concerns one must look at before deciding to change the RO Membrane which is
very crucial for the smooth performance of the RO System.
So, Before Choosing
the RO Membrane:
- One must take a look at the brand being used. If your
product is a branded one, then it’s good for use or else it can get
damaged.
- The RO membrane should be covered in a proper packaging
unit before they are installed. Packaged goods mean it’s a new one.
- The service person who comes to your home for changing
the RO membrane should wash their hands before performing any task.
- An RO system service kit comes in handy while making
such replacements as it helps keep your system at peak performance.
Today I am here to
discuss with you the process by which you can change the RO membrane of your
system easily within 5 small steps.
Step 1: Turn off the water supply line and close
the ball valve on the RO storage tank. This is typically done by turning the
blue ball valve on top of the tank anticlockwise.
Step 2: Open the RO faucet and allow the
pressure in the system to bleed off. While doing this place a shallow tray
under the filter so that the water doesn’t fall on the ground.
Step 3: Disconnect the tubing from the membrane
housing cap and unscrew the membrane housing to take out the RO membrane. You
may require needle nose pliers to do so.
Step 4: You can label each tube so that it
becomes easier while reconnecting. Two clips hold the membrane housing place,
one needs to remove the clips to rinse the inside part.
Step 5: Finally enter the new membrane into the
membrane housing and reconnect the tubes fitting the faucet to it. Finally, the
RO is ready to be reused.
At the same time, it
is also necessary to clean the RO
spare parts so that it works
smoothly. The other RO spare parts like sediment filter, carbon filter, and
polishing filter need to be changed every 6-12 months. Replacement of the RO
spare parts becomes an essential part as it helps in the smooth operation of
the RO system.
Hope you feel it
interesting learning about the process of changing the RO membrane and would
spread the knowledge as much as possible. Pearlwater
provides you the best RO membrane price in the market. Our RO membrane price is
quite affordable to all kinds of industries and fits in any budget and it is
ISO certified and thus is of excellent quality. For more details, or to place
an order you can dial our number (+91) 958-221-5137 or visit our website pearl
water.in.

Comments
Post a Comment